Queensland Smoke Alarm Legislation

The law is changing.
Is your home ready?

From 1 January 2027, every Queensland home must have photoelectric, interconnected smoke alarms in every bedroom, connecting hallway and storey. We inspect, install and certify — so you're covered before the deadline.

Days
Hours
Mins
Secs
Local Fraser Coast team
Fully compliant installations
Houses, rentals, units & caravans

One goes off. They all go off. That's the new standard.

Book My Upgrade
What the law requires

Five boxes every Queensland
home must tick

01

Photoelectric

Detects smoke using a beam of light — faster to respond to smouldering fires, one of the most common ways house fires start. Ionisation sensors are out.

02

Interconnected

Every alarm linked — by wire or wirelessly. When one detects smoke, they all sound, alerting everyone in the home at once.

03

Powered properly

Hardwired to mains power, or fitted with a sealed 10-year battery. Existing hardwired alarms must be replaced with hardwired.

04

AS 3786-2014

Every alarm must comply with Australian Standard AS 3786-2014 — look for the marking on the unit itself.

05

Right locations

Every bedroom, every hallway connecting bedrooms, every storey — and the ceiling of registered caravans and motorhomes.

Does this apply to me?

Every home. No exceptions.

No matter where you live on the Fraser Coast or what kind of home you're in, the same rules apply by 1 January 2027.

Houses & units

Owner-occupied homes and apartments across Hervey Bay, Maryborough and surrounds.

Rentals & landlords

Investment properties must be compliant — landlords and property managers carry the responsibility.

Caravans & motorhomes

Registered caravans and motorhomes need a compliant alarm on the ceiling too. Grey nomads, we've got you.

The 60-second self-check

Are your alarms compliant right now?

  • Photoelectric — no ionisation sensor
  • Interconnected — one sounds, all sound
  • Hardwired or sealed 10-year battery
  • Marked AS 3786-2014
  • In every bedroom, hallway & storey

Missing a tick?
Not sure what you're looking at?

If your alarms are more than 10 years old, use an ionisation sensor, or don't talk to each other — it's time to upgrade. We'll do the checking (and the ladder climbing) for you.

Book My Free Compliance Check
Getting compliant is simple

Three steps. Fully sorted.

1

Request your quote

Tell us about your property — house, rental, unit or van. We'll come back fast with a straightforward, no-obligation quote.

2

We inspect & install

Our local team checks your existing alarms and installs compliant photoelectric, interconnected units in every required location.

3

You're certified compliant

Walk away with a fully compliant home before the 1 January 2027 deadline — and real peace of mind every night after it.

Your questions, answered

Smoke alarm law FAQs

What's changing in Queensland from 1 January 2027?

All Queensland homes, units, and registered caravans and motorhomes must have compliant smoke alarms installed by 1 January 2027. It's the final stage of legislation introduced in 2017, rolled out over 10 years.

What does "compliant" actually mean?

Alarms must be photoelectric, interconnected, comply with Australian Standard AS 3786-2014, not contain an ionisation sensor, and be hardwired or powered by a sealed 10-year battery.

What does "interconnected" mean?

Your alarms are connected to each other — directly wired or wirelessly. If one alarm detects smoke, they all go off, alerting everyone in the home at the same time no matter where the fire starts.

Where do smoke alarms need to be installed?

In every bedroom, in hallways that connect bedrooms to the rest of the home, on every storey — and on the ceiling of registered caravans and motorhomes.

How do I know if my current alarms are compliant?

Look for the AS 3786-2014 marking on the alarm. It's time to replace your alarms if they're more than 10 years old, contain an ionisation sensor, or don't interconnect with the other alarms in your home. Not sure? We'll check for you — that's the easy part of our job.

Wireless or hardwired — which do I need?

Hardwired alarms connect to mains power and must be installed by a qualified electrician — and if your current alarms are hardwired, replacements must be too. Wireless alarms interconnect without cabling and run on a sealed 10-year battery. We'll recommend the right option for your home in your free consultation.

Deadline: 1 January 2027

Don't wait for the
December rush.

Installers across Queensland book out fast as the deadline closes in. Lock in your spot now, get compliant early, and spend summer thinking about anything else.

Fraser Coast Smoke Alarm Compliance Legislative information based on Queensland Fire Department guidance on smoke alarm requirements commencing 1 January 2027. For full details visit the Queensland Fire Department website. © Fraser Coast Smoke Alarm Compliance.
About Us

Professional Smoke Alarm
Compliance & Safety

With over 15 years of experience, our family-owned business specialises in smoke alarm installation, compliance and maintenance, including certifying pool safety barriers, tailored for homeowners, landlords and real estate agents. We offer fast turnarounds, are fully licensed and insured and ensure compliance with the latest QLD regulations, only using high-quality, certified products.

Trust us to protect what matters most; contact us today for peace of mind!

* Terms & Conditions Apply

Contact Us
For Expert Smoke Alarm & Compliance Solutions!
All Products are Australian Certified

You can be assured that you are not only compliant but also well-protected, as we exclusively use the highest quality Australian certified smoke detectors.

Why Choose Us

Your Trusted Partner in Safety

Expertise You Can Trust

With over 14 years of experience, we specialise in smoke alarm installations, compliance and maintenance tailored to homeowners, landlords, and real estate agents.

Family-Owned Values

As a family-run business, we prioritise excellent service with a personal touch, ensuring you feel valued and secure.

Fast Turnaround

We understand the urgency of safety. Count on us for quick installations without compromising quality.

Comprehensive Solutions

We don’t just focus on smoke alarms; we also certify pool safety barriers, offering a complete safety approach for your home.

Legislative Compliance

Stay ahead of new smoke alarm regulations with our knowledgeable team, ensuring your property is compliant and safe.

Fully Insured & Licensed

Rest easy knowing that we are fully licensed and insured, providing you with a detailed report and certificate after every job.

High-Quality Products

We use only the best smoke detection technology, that is fully certified ensuring reliable protection for your home.

Customer Satisfaction

Our clients across Fraser Coast trust us for our dedication to safety and superior service.